Thread: Closed or Open?
View Single Post
  #3 (permalink)  
Old 23-08-04, 03:48 PM
Finless's Avatar
Finless Finless is offline
Finless: You couldn't invent him...
 

Join Date: Apr 2003
Location: Bexhill, East Sx.
Posts: 15,256
Thanks: 4
Thanked 16 Times in 14 Posts
Finless was born with gillsFinless was born with gillsFinless was born with gillsFinless was born with gillsFinless was born with gillsFinless was born with gillsFinless was born with gillsFinless was born with gillsFinless was born with gillsFinless was born with gillsFinless was born with gills
Either both open OR, if you can reach the cylinder valves easily, you could have one closed down (with the hoses pressured) as is usually done with a deco bottle. You need to be able to open/close the valves without thinking as you should be breathing each cylinder down by 50 bar (for example) to ensure you have half your gas left if anything goes wrong.

Not sure where "part open" comes into the equation - unless you are thinking about an isolator valve on a manifold.
__________________
Citius, Altius, Fortius? No: Lower, Slower, Fatter.

Last edited by Finless : 23-08-04 at 03:50 PM.
Reply With Quote