| Imported post
Hey Wreckie,we're in a minoroty here y'know!I've gota twinvert set but it's stillin it's RN config so it's just got the 1 DIN on the manifold...rule of thirds again.I too can't really be arsed,just shut it down/turn it on and if you need repeat till in the dry bit.
Steve,Andy 2 tanx has been experimenting with his twinverts so he'll be handy to talk to.My old Man uses ex-police(twinverts) sets but on standard length hoses!!
Mail me if you want more on that.Right,hoses.If you go the independant route you'll probably need longer hoses for the DV's,try it first though as you may find they reach...sometimes.If not you've got a couple of options.Sherwood do long hoses as standard,as I beleive do a couple of others.See if these are suitable for using with your 1st/2nd stages,remember you can always use adapters if needed.Standard type hoses can be made up by SCUBA suppliers but they're usually priced accordingly.A betteroption is to find an industrial hose/hydraulic specialist in Yellow Pages etc and get them to make you up a set of Aeroquips or similar,just tell them the lenght you need and the working pressure.Get stainless fittings etc. too as some are alli.They usually cost about £20 tops.
HTH,Hobby.  |