Thread: Manifolds/valves
View Single Post
  #1 (permalink)  
Old 13-01-05, 03:40 PM
Gavin Smith's Avatar
Gavin Smith Gavin Smith is offline
Proven ability to roll with it.
  

Join Date: Sep 2004
Location: Dubai
Posts: 2,289
Thanks: 0
Thanked 0 Times in 0 Posts
Gavin Smith paddles in the seaGavin Smith paddles in the seaGavin Smith paddles in the seaGavin Smith paddles in the seaGavin Smith paddles in the seaGavin Smith paddles in the seaGavin Smith paddles in the seaGavin Smith paddles in the seaGavin Smith paddles in the seaGavin Smith paddles in the seaGavin Smith paddles in the sea
Manifolds/valves
I'm about to buy a set of 232 bar 12's.

Does it have to be captured o-rings for DIR or is that just "optimal". Is optimal mandatory?

I checked on the GUE website but could only find this...

Quote:
Tanks/Cylinders: Students may use dual tanks/cylinders connected with a dual outlet isolator manifold, which allows for the use of two first-stages. Students may also use a single tank/cylinder with a K, H, or Y-valve.
Reply With Quote