Quote:
| Originally Posted by NotDeadYet Before I waste a load of wedge on a Dolphin bypass valve, can the actual orifice be removed from the screwie-in-holder-tube-thingie? |
Yep, the dolphin bypass valve makes a great ADV and manifold, you can unscrew the brass sonic orifice bit to leave 2 small holes which are big enough for 1L / minute and flushes. I did this on my Mk 1 and it works fine. The main problem is that all the screw fittings are non standard, you need to get the "complete" unit and then cut the end of the hozes you get, you can then add re-usable hoze fittings of the type required, eg 3/8 UNF for your diluent, or 1/4 bsp to convert to swagelok, connect to a KISS valve etc.
John