Quote:
| Originally Posted by jptaylor9 But 60m?
Was advised on course to always have at least 100bar of 02 before any dive in onboard cylinder. Must be getting very low pressure fills if only 85bar after calibration! |
Ideally I wouldn't dive with such a low fill but with no shop here possessing a booster you are stuck with between 100 - 115 bar fills, not a lot you can do about it unless you buy your own booster and I can't afford it as I've been unemployed for over 3 months!
My strategy is to carry an offboard O2 supply and this was of course tested prior to the dive without problems (the 2nd stage was tested, this was the part that freeflowed obviously).
60m? ..... I know where you are coming from but I see little point in debating this further here, you're either happy to do it or you aren't, please bear in mind my location.
Ian