Thread: Drager/DIN adaptor
View Single Post
  #6 (permalink)  
Old 11-02-06, 11:15 AM
triffid467 triffid467 is offline
New Member
  

Join Date: Nov 2005
Location: Australia
Posts: 15
triffid467 saw the sea in a book once
The conversion. This is pressure rated on the handwheel and is designed to handle up to 200 bar from the cylinder. The governing factors for setting IP at 16 bar will be the 1st stage design, mainly HP seat, and the pressure rating on the LP hoses.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote