Thread: Can apeks 50 regs be converted from A clamp to din?
View Single Post
  #5 (permalink)  
Old 02-04-06, 01:25 AM
londonsean69's Avatar
londonsean69 londonsean69 is offline
Non-diving member
  

Join Date: Mar 2005
Location: Sutton
Posts: 1,104
Thanks: 0
Thanked 0 Times in 0 Posts
londonsean69 is never out of the waterlondonsean69 is never out of the waterlondonsean69 is never out of the waterlondonsean69 is never out of the waterlondonsean69 is never out of the waterlondonsean69 is never out of the waterlondonsean69 is never out of the waterlondonsean69 is never out of the waterlondonsean69 is never out of the waterlondonsean69 is never out of the waterlondonsean69 is never out of the water
Very, very easy to do, takes all of 2 minutes with the right allen key and a biggish spanner (or adjustable). The big nut that holds the yoke on undoe´s, and the yoke etc. pulls away. The DIN bits then just screw in in their place.
Probably took longer to write the reply than it will to change the parts!!
__________________
__________________________________
Sean Arrowsmith
----------------------------------
If in doubt - Give it a clout

www.sean-h2o.com - Some more of my pictures
Reply With Quote