Quote:
| Originally Posted by Scubee Great post, a lot of good stuff in there.
When i was first having problems with shutdowns, after elimitating all the other stuff, I discovered it was my trim. If there was any air trapped in the top of the wing it would push the twins slightly away from my back. By doing it in a slightly head down position, the air went to the bottom, and voila! the twins were now in the right place. |
I would offer that your harness is too loose then.. its the adjustment in trim - irrespective of gas - that has sorted you out..
The amount of gas in the wing should never change the distance between you and your valves..
just my 2c..