Thread: Problems with fitting spring straps
View Single Post
  #1 (permalink)  
Old 19-10-06, 02:44 PM
broady's Avatar
broady broady is offline
Noble D.U.E member
  

Join Date: Oct 2006
Location: North Kent
Posts: 1,186
Thanks: 6
Thanked 6 Times in 6 Posts
broady is never out of the waterbroady is never out of the waterbroady is never out of the waterbroady is never out of the waterbroady is never out of the waterbroady is never out of the waterbroady is never out of the waterbroady is never out of the waterbroady is never out of the waterbroady is never out of the waterbroady is never out of the water
Problems with fitting spring straps
Amongst loads of new bits I've received from Diving Niknaks (great service by the way) were some spring straps to fit to mine and Nicola's fins.

The problem I am having is probably particular to fitting them on Scubapro Twin-Jet fins. Basically the longest springs available aren't long enough if I remove the entire existing fin clip assembly and the shortest ones aren't short enough if I mod them to fit the existing quick release fitting instead.

Has anyone got any tips or had a similar problem with Twin-Jets or the same fittings on other Scubapro fins?

We've both got fairly UK standard mens and ladies size feet (8/9 and 5 respectively) so odd size plates of meat aren't the problem !!

Any help gratefully received.

Thanks

Graham
Reply With Quote