View Single Post
  #1 (permalink)  
Old 28-02-02, 11:20 PM
Jay's Avatar
Jay Jay is offline
Giggety Giggety
 

Join Date: Nov 2001
Location: Wakefield, West Yorkshire
Posts: 5,063
Jay is a scuba diver - cold waterJay is a scuba diver - cold waterJay is a scuba diver - cold waterJay is a scuba diver - cold waterJay is a scuba diver - cold waterJay is a scuba diver - cold waterJay is a scuba diver - cold waterJay is a scuba diver - cold waterJay is a scuba diver - cold waterJay is a scuba diver - cold waterJay is a scuba diver - cold water
Imported post

I'll be looking to purchase a twin set and wings at the back end of this year but my question is regarding regulators. I dive with Apeks regs (TX100, TX40 octo & TX40 on  a stage bottle) and would like to continue with Apeks if possible. However, the Apeks reg doesn't have a air feed from the left side - how would I mount both regs over my right shoulder and is it advisable to do so? I have a neck bungee and guess it could be used. The other method I have seen is with DIR divers who attach clips the each reg and then clip/unclip them as required. What are your thoughts?

Regards
Reply With Quote