View Single Post
  #7 (permalink)  
Old 14-07-03, 03:24 PM
dave archer's Avatar
dave archer dave archer is offline
Lucky Man
 

Join Date: May 2003
Location: North London
Posts: 2,007
dave archer is a scuba diver - warm waterdave archer is a scuba diver - warm waterdave archer is a scuba diver - warm waterdave archer is a scuba diver - warm waterdave archer is a scuba diver - warm waterdave archer is a scuba diver - warm waterdave archer is a scuba diver - warm waterdave archer is a scuba diver - warm waterdave archer is a scuba diver - warm waterdave archer is a scuba diver - warm waterdave archer is a scuba diver - warm water
Imported post

Thanks for the replies all.

It's a new off the peg suit. I'm guessing that makes the seals not being tight enough my problem rather than theirs, however I think the low profile apex dump is leaking too (have today heard on DNet that this one always does ) and this is their problem IMO so I'll talk with ND and we'll see.

Lou, not rude at all, both good points. I'm not particularly sinewy, but did get a sudden in rush when I grabbed a wreck railing - tensing my fist raised the sinews in my wrists I guess. Can live with a little leaking under certain conditions like that, but they leaked if I raised my hand above my head, so tighter needed methinks . As for the neck seal, yep, was turned in by about 4cm.

Digger, ta but think I might try to get the seals sorted before I go the underwater lynching route .

Anyone know if you can fit latex instead, to a neoprene suit? I'd guess so given you can buy neop suits with latex seals...?

Thanks again all - may your undies not be as wet as mine on your next dive
__________________
Experience is a dear teacher, and only fools will learn from no other. -- Benjamin Franklin
My photos
http://www.yorkshire-divers.com <- Carlsberg don't make diver forums...
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote