Thread: Hose attatchment thingy!
View Single Post
  #7 (permalink)  
Old 09-09-03, 10:54 AM
Finless's Avatar
Finless Finless is offline
Finless: You couldn't invent him...
  

Join Date: Apr 2003
Location: Bexhill, East Sx.
Posts: 14,523
Finless is never out of the waterFinless is never out of the waterFinless is never out of the waterFinless is never out of the waterFinless is never out of the waterFinless is never out of the waterFinless is never out of the waterFinless is never out of the waterFinless is never out of the waterFinless is never out of the waterFinless is never out of the water
Imported post
Quote:
Originally Posted by [b
Quote[/b] (Mark Davies @ Sep. 08 2003,23:18)]I've noticed on other rigs that you can get a fitting to go on the hoses where they connect to the first stage. These turn the hose through 90 degrees so that they run down and alongside the first stage, rather than out and perpendicular to it. These would solve my problem.

Does anyone know where I can get them, what do they cost, and can you get one for a high pressure hose?

Thanks in anticipation of wise and knowledgable advice.
I call them 90 degree elbows and I use four on my twin set "set up". Any dive store will be able to order them for you and I believe they are abt £12 each.

The only person I know that used the HP elbow got rid of it because it kept blowing the O ring - well twice and then he got rid of it - I don't know about price for one of those.

If you can't find any info locally then PM me and I will check out who the reseller is. I bought mine from a dive shop sell off @ £5 each.  
__________________
Citius, Altius, Fortius? No: Lower, Slower, Fatter.
Reply With Quote