Right:
Buddy Tekwing (£150)
Combro backplate: Free Xmas present
£35 plus £10 p&p
3-4m webbing - £5ish
D-rings & 3-bar sliders - had already
Brass eyelet kit - a quid or two. I dunno.
Take wing. Lay backplate over it in appropriate place. Use a soldering iron to melt through the right holes.
Remove backplate, enlarge holes. Fit brass eyelets (I use 10 or 11mm eyelets for my 8mm bolts, nice & easy)
Wing is now set up & ready for use.
Harness:
Find the middle of the webbing. Thread it through the angled slots of the backplate so the middle of the webbing is in the center of the backplate. At the back of the backplate, of course.
Thread the webbing ends through the horizontal slots above the angled ones, over the top of the backplate, and down to the bottom, where there are two slots.
Thread the webbing through the inner slots, thenback through the outer slots.
Thread things through appropriately to fit you perfectly.
Scream as you realise you didn't put any of the D-rings or triglides on, unthread harness, thread on paraphanalia, adjust everything to fit again