View Single Post
  #7 (permalink)  
Old 16-05-07, 06:19 PM
Nick_lincoln's Avatar
Nick_lincoln Nick_lincoln is offline
1/2 of slut divers
 

Join Date: Mar 2007
Location: Lincoln
Posts: 266
Nick_lincoln swims in cold waterNick_lincoln swims in cold waterNick_lincoln swims in cold waterNick_lincoln swims in cold waterNick_lincoln swims in cold waterNick_lincoln swims in cold waterNick_lincoln swims in cold waterNick_lincoln swims in cold waterNick_lincoln swims in cold waterNick_lincoln swims in cold waterNick_lincoln swims in cold water
Mine's a little more simple than most. Two cut down 3 ltr jubilee clips with a D ring on each. One just back from the cylinder neck and another about 15 cm from the base. Big carabina on the front one which clips to my wing shoulder strap D ring and a small double snap bolt which clips to another D ring on the 'wing' section of the wing. This is for a 3 ltr cylinder with nitrox in.

IANTD ERD on the way so I might revisit this set up.

QUESTION: - Why do most rig stage cylinders with rope rather than jubilee clip attachments?? I read that it was so the cylinder could be cut off if needed?? Personally if I need to free myself of the 3 Ltr I can easily access the carabina and snap bolt.

Last edited by Nick_lincoln : 16-05-07 at 06:22 PM.
Reply With Quote