| VR3 Question
Hi,
As daft as this sounds please could somebody give me the step by step button presses required to switch gas's upon reaching the required depth.
I have sucsessfully set up my gases in my gas list and activated them. When I reach the correct depth i get the gas switch icon, from here i am confused.
I have done some testing dives (not into deco) and practiced my swaps with mixed results. I have read the manual and all it says is that the icon will appear and you can swap! - i would like to know what combination of pushes (short/long, left/right) i should be doing to swap
Thanks for your time/help
(open circuit VR3 3.03) |