Quote:
| Originally Posted by TonyD If you have a model car shop near you, you should be able to get some copper bar tags to solder to the batteries.
As to being tight in the case, both my F2 packs have plastic or silicon tube to hold the packs in the midle of the canister and I'm sure the packs are shrink wraped. Is this a pack somebody has made as a replacement ? |
Thanks Tony - l'll try the model car shop up the road
As I've said, this isn't a new break. It's been repaired before, so I'd guess that any shrinkwrapping was removed - usually the plastic type stuff is very thin anyway.
I suspect the batteries are original as they are industrial batteries and not the common type that are easily purchased. Just a suspicion though
On a side note, I did manage to connect the two parts with a croc clip and a brief test of the torch proves it to be brighter then a bright thing, so at least I know the head is working