Quote:
| Originally Posted by Abyss Divers When we do our Deco Stops after dives to 60 meters on air we use EANx 50% from the first stop on 9 meters still staying the computer Deco time on air this to be on the safe side! If you start with accellerated deco with Nitrox after a deep air dive you will for sure be to close to a Bend! Better to be conservative and knowing that you are safe! Even running up some stairs could cause a Bend after accellerated deco! |
Must be a bounce dive?
To do deco from a 60m dive on air calculations would run into hours for a descent bottom time of say 20/30mins? Are you talking about a multi profile dive where your max depth was 60m?
I'm also with Mark on the 50% at 9m but I'm a wimp when it comes to pp02 and stick to the 1.4 BSAC recomends, I know it's conservative, but I do so little of this kind of diving it does not realy effect me, it's good to know what your doing though!
James