After the DIR introduction Mal arranged at Stoney lats weekend i had a few questions that i never got chance to ask. and following reading the new GUE site and the article on Equipment Configuration it still does not answer one of the questions.
Quite simple A Clamp 1st stage's
Ive dived with my Mk II now for 3 years with a R190 & R290 regs and they appear to function verywell in all weathers & temps from 4 degrees to 30 degrees.
But the aritcle deos not state that the Din style is mandatory neither does the picture
http://www.gue.com/files/page_images...jjboat0246.jpg http://www.gue.com/files/page_images...bimini-311.jpg
ok so at present i dive using a single cylinder & stage for OOA & back up with A clamps would i have to change the 1st stages to comply with the ethos of GUE