View Single Post
  #1 (permalink)  
Old 26-03-08, 07:46 AM
I-Scott's Avatar
I-Scott I-Scott is offline
New Member
 

Join Date: Mar 2008
Location: South London
Posts: 17
I-Scott paddles in the seaI-Scott paddles in the seaI-Scott paddles in the seaI-Scott paddles in the seaI-Scott paddles in the seaI-Scott paddles in the seaI-Scott paddles in the seaI-Scott paddles in the seaI-Scott paddles in the seaI-Scott paddles in the seaI-Scott paddles in the sea
Wing - How to adjust harness

Hi

I am new to a wing and looking to set it up so that it fits well enough to be just about comfortable.

I have a CD TDB Wing, but the webbing is still as set by CD, I do know that there is a certain amount of adjusting to get things right, but how much,

what am i looking for when i adjust the harness,
where should i be aiming to get the SS Back Plate
Where should the quick release clips come in relation to the length of the webbing over the shoulder, for instance.

I do know there are a few thoughts, but at the moment the one i am lookign to use is to lock off or remove the right side quick release. I am not looking to get into a debate about dir or non dir at this time,as i dont know enough, yet.

I have a look around on the net for advice etc, but other than how to thread the webbing etc, i have found no clear words of wisdom.

If any body can help, on this i would be grateful

Thanks
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote