| | |||||||
|
Welcome to the YD Scuba forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact support. |
| BCDs / Wings: Discuss Buddy teck wing in the Dive Kit and Equipment forums: for the owners of a Buddy teck wings . what do you think of it ?? , does it work well with twin ... |
| | LinkBack | Thread Tools | Display Modes |
| |||
| Imported post <font color='#FF0000'>i got one at the show. with 22.5kgs of lift it will have enough support. you can move the d-rings where ever you like, and the twinning bands hold the cylinders stable enough, although some would argue not perfect (they are the picky ones!). also its got a lifetime warranty, option of Auto Air, and/or mini cylinder. you could also use it with single cylinders should you wish and, it is a good price! Chris |
| ||||
| Imported post The wing itself is great. The harness sucks eggs, as the webbing is so slippery it's impossible to adjust properly for any length of time. I used mine only until my Combro backplate arrived. It's great for twin 7s, tho I didn't get on at all well with the camband system - if you can use bolts, then I'd advise you to do so. The corrugate hose wouldn't look out of place on an elephant's face, but it's easy enough to chop that short. I found the pull-dump on the corrugated hose too bulky - it tried to occupy the same space as the twinset. I replaced it with a non-dumping elbow which was much better. I had a try at putting a pull-dump cord on the right shoulder drump, but it had a tendency to jam either closed or (worse) open. The bum-dump, I find, is rarely in a position to dump a worthwhile amount of air. The D-rings on the side of the wing didn't add any value, so I removed them. Same goes for those triglides the waist strap is threaded thru, tho they might prove useful if you use it with a single tank. Gosh, sounds very doom & gloom, doesn't it? I'll re-iterate that it's a great wing and I'm very happy with it. It just needs a bit of adapting My basic advice would have to be: Unless (like me) you want a nice red wing instead of a boring black one, forget the Tekwing and buy a Redwing and Combro steel plate. Get them to supply it with a non-dumping elbow on the corrugated hose, ditch the D-rings on the sides of the wing, put the hose on the left side if you bought the Redwing, and voila, you'll have a very tough wing, idea for twin 7s, at a very low cost. You'll have to get used to dumping via the hose instead of by a pull-dump, which is a pity, but that's wings for you.
__________________ Life is like being immersed in water - it feels good, but the longer it lasts, the more wrinkled you get |
| ||||
| Imported post Fiona I got one off e-bay a few weeks ago - love it, beautifully built. Currently using a 12 & pony, plenty of lift. Dom uses one and has twin 7's (232) but has modified it quite heavily, s/s b/p plus new harness etc. Difficult to swap quickly between single and twin tanks but otherwise seems very good. Alternative cam bands are about £40 I believe, sometimes available on e-bay too, I'm selling my single tank ones as I have bought the piggy back pony bands recently. Recently described as 'do you want to go from a to b in a car or a tank', the tek-wing (and Buddy in general) are regarded as tanks. That'll do for me. HTH Matt ps Dom got in first |
| ||||
| Imported post I've had mine for nearly two years now - love it, although, like Dom, I have modified mine to go with my twin 12's by getting rid of the ABS backplate and harness and replaced them with a s/s backplate and harness and the twins are bolted tthrough these with s/s bands and bolts. I paid £180 for mine (with twin cam bands/without emergency bottle) but have been told it can be bought for as little as £150 - definitely shop around for the best price if you decide to go for one. Regards, and dive safe Martin |
| ||||
| Imported post Fiona
__________________ Any reliance placed in others is done so at your own risk. |
| |||
| Imported post <font color='#FF0000'>you'll not get one less than £150, thats below trade price... i must admit that when i can afford ill upgrade to s/s backplate, banded and bolted twinset but im happy borrowing school cylinders for now. i got the emergency cylinder for diving with single 15ltr and pony, the good old saying 'you can never have too much gas'. diving with twins i use the blanking plate the 2 below are AP200, no cylinder, twin bands www.kentdiving.com - £184 inc P&P www.sdswatersports.co.uk - £175 (not sure on P&P) chris |
| |||
| Imported post One of my mates dives the buddy redwing with twin 12ltrs and 7ltr stages and has no problems - although like the others above he has adapted his a fair bit - ss backplate, DIR type harness etc etc - he loves his and as with all buddy stuff you could blow the sodding thing up and it would survive - tough as you can get - the forces use a version of the commando I believe so thats how tough it is. I would use one quite happily and after all they are quite cheap by comparsion. Dinger |
| ||||
| Imported post <font color='#0000FF'>£150.00
__________________ Si non confectus, non reficiat |
| Thread Tools | |
| Display Modes | |
| |
| | ||