-
Help with shoulder dumps on Poseidon Besea
I have a Posiedon Besea with a W50 wing.
I have just obtained a W100 wing but it does not have a shoulder pull dump.
Can I swap the corrugated hose, valve etc from the W50 with the one from the W100?
The corrugated hose on the W100 is longer than that on the W50, can I swap these over, of course I will need to replace the pull dump string with a longer peice
-
-
You should be able to swap the inflators over, they just unscrew. The wire that operates the shoulder dump cannot easily be removed, so you can't swap the hoses over. If the dump is in the same place on both wings you should be ok with the shorter hose on the W100.
The question is, why do you think you need a wing with 100lb lift?
Pete
-
-
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules