| | |||||||
|
Welcome to the YD Scuba forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact support. |
| Commercial Diving: Discuss Commercial/Pro diver bail-out DIN/A-Clamp? in the Technical and Specialist Diving Forums forums: Maybe it has been mentioned before but have you guys noticed that in almost all the TV clips showing commercial ... |
| | LinkBack | Thread Tools | Display Modes |
| |||
| Commercial/Pro diver bail-out DIN/A-Clamp? Maybe it has been mentioned before but have you guys noticed that in almost all the TV clips showing commercial deep sea divers ("Sea Hunters" etc.) the bail-out cylinder still use the A-Clamp method of attaching a first stage. One would think that when crawling around inside wrecks and with the cylinder being the last resort a DIN would be more fitting. Any specific reason or is it just USA logic? |
| ||||
| Nam Sounds like good USA logic, but from someone living in Canada? But a good point non the less and maybe some Commie diver will have a good answer. Hey you live even further from the sea than our Brummie divers, how long to a good sea dive for you 3 hour flight? Dive Safe Paul
__________________ Paul Oliver Canterbury Divers DUE - Dover Underwater Explorers 2 Rules - 1. You books you pays. 2. Always return to the shot |
| |||
| Paul I'm a new resident over here. I should not yet be considered a "local". :-) Sea dive: 12h vehicle drive or under 2h flight. But there are some lake dives closer. Steve All the divers I saw wore the kit in "standard" config - valve up. They were diving at around 110-130m if I remember. But then over here 200 bar cylinders are considered "high pressure"... |
| Thread Tools | |
| Display Modes | |
| |
| | ||