Sections
Categories
Recent Comments
Great article and with luck, once I'm patched up I'll be trying out the JJ. I'm definitely going... 
I have to admit it was my original stupid drunken Idea but thanks to
Morag & Gareth it became...
IART JJ-CCR Level 1 in Safaga with Dave Thompson
Background:
On October 16th, Janos, Chasey, HP & I descended upon the NDAC in Chepstow to try out the new JJ-CCR. I was in the market for a rebreather and had been considering the rEvo, until Mark put me off with his extensive list of drawbacks. The JJ seemed to tick all the right boxes.
Three days later I placed my order. Janos & Mark soon f
...
"You've got a skin bend on your shoulder and a suspected bend in the joints of your finger. You'll not be going home tonight"
Right about now the events of today started to sink in. I changed out of my clothes into a paper smock and sandals ("can't have any risk of sparks where you're going!") and was led towards the chamber. It was 7.30pm and all the attendants had been called in on emergency
...
Hello all,
Thank you for making Scuba Santas 2009 a great event!
Well done on creating a new world record 153 simultaneous diving santas!
If you have any photos and you are happy for us to display them via the website please email them to us at info at scuba - santas .co .uk and give you a thanks.
If you have any comments also for the site please send them through on Contact Us Scuba Santas
...
Thanks to all the 'vogs and 'togs for their hard work at the weekend.
All the photos were downloaded to Chris (Uwila's) laptop and unfortunately as I was involved in the clean up, didn't see him before he took Andrew and Bea to the B&B, but he is sending me all the images shot from the underwater section for forwarding to GBWR for verification.
Some of these images will also make it onto the DVD
...
Recent Forum Postsnow that would confirm to the neighbours I am indeed stark raving mad.... great mental image from that one :D
the 'grey city' of Plymouth, should be good, i know the bay of good hope is still shitty :(
Replied
Actually getting enough pressure on the DIN slug on a DS4 without a torque wrench and one of those "spare hand" doohickeys that screw into a port, is pretty hard. They need to be very tight (30nm if...
Recent Articles
Since the Dude took an interest.
A prat
nickb on 08-02-10