Drager Valve to DIN convertor

[Muddweller]

Any Drager divers need a Din convertor ? It's primarily used as an adaptor for filling drager tanks from a DIN whip. Or can be used to allow a standard DIN232 reg to be used on a drager tank valve. I would assume existing drager owners would already have one but how about a spare

Open to offers


Regards
Karl

[divetheworld]

Originally Posted by Muddweller

Any Drager divers need a Din convertor ? It's primarily used as an adaptor for filling drager tanks from a DIN whip. Or can be used to allow a standard DIN232 reg to be used on a drager tank valve. I would assume existing drager owners would already have one but how about a spare

Open to offers


Regards
Karl

Keep it and stick it on a old Draeger cylinder to use it as a stage or bail.
If your short of cyls, I've got a 5ltr Ally thats out of test that Im giving away.

[Muddweller]

Originally Posted by divetheworld

Keep it and stick it on a old Draeger cylinder to use it as a stage or bail.
If your short of cyls, I've got a 5ltr Ally thats out of test that Im giving away.

Damn !! Why didn't I read your reply Brent before I agreed to sell it.

[jknights]

Mudweller,
Where did you get the converter from in the first place ?
Do you have a url.?

Thanks
Jonathan

[divetheworld]

Originally Posted by jknights

Mudweller,
Where did you get the converter from in the first place ?
Do you have a url.?

Thanks
Jonathan

JK,

Try here mate.

http://www.tecme.de/frame_eq1.htm
item 16

[jknights]

Thanks Brent.

How goes the quadding ?
I start my Inspiration training next week.
I be a novice again in a month 8-)
15years of diving to get this far !!

[divetheworld]

Originally Posted by jknights

Thanks Brent.

How goes the quadding ?
I start my Inspiration training next week.
I be a novice again in a month 8-)
15years of diving to get this far !!

It goes OK, ish.
Dropped a bollock last weekend, was going to post on it but felt a bit of a turd.
Made a new backplate adaptor for the butty box which made the loop a bit tighter. Dropped off the RIB and flooded the loop (exhale side anyway), didnt get any signs until I had passed 20m. Then gurgle, gurgle.:o Bollox.
Semi'd it to the top and got on the boat. Surprisingly the ex lung was chocker with water but the scrubber was bone dry. Lucky fker! Drained it out, refitted the dodgy loop connection and froze my knackers off for an hour.
Result.

[jknights]

Turd... Do you mean a floater?.. Hey we are into the brown stuff again!.

Better to experience the problem and survive.
Sounds like you had a good end result.
How was your O2 cell(s) did they survive.?

Cant wait for next few weeks to pass so I can get back to the diving. Reading the Inspiration manual doesn't make you want to stay awake expecially after you have read it the first couple of times. :-)