Latest Incident ybod

[alby scubakitmarket]

regarding the latest incident wuth the new vision i am becoming concerned, i will be getting my new ybod soon with all the bells and whistles on etc, what i would like is some info on the deco software, the info i want is how does it compare to the vr3 do the both run the same or similar deco profiles,

i intend to keep my vr3 fingers crossed never had a problem with it

cheers

alby

www.scubakitmarket.co.uk

[daveb0000]

Originally Posted by alby scubakitmarket

regarding the latest incident wuth the new vision i am becoming concerned, i will be getting my new ybod soon with all the bells and whistles on etc, what i would like is some info on the deco software, the info i want is how does it compare to the vr3 do the both run the same or similar deco profiles,

i intend to keep my vr3 fingers crossed never had a problem with it

cheers

alby

www.scubakitmarket.co.uk

when you say the lastest incident with the new vision what do you mean ??

[Janos]

Personally I wouldn't use the Vision electronics for deco but would use some other means.

Janos

PS - Are you the same Scubakitmarket that just spammed me?

[alby scubakitmarket]

sorry the incident was posted a couple of days ago when a diver had a massive hit cannot rememeber the name

alby

www.scubakitmarket.co.uk

[colinicky]

the only issue i'm aware of is the time keeping on the nitrox software BUT it doesn't affect all units & with version 30 (i believe ) does not affect trimix.
or is there another issue ?
BL**DY well hope not my unit should be at my instructors NOW!

[daveb0000]

i have a new inspiration with vision, with as you said all the bells and whistles and have it loaded with the trimix and nitrox deco software also i use a vr3

how does the deco on the vision compare? well from what i have seen so far i have the vr3 set on a set point of 1.25 and the vision on 1.3 during the dive and the vr3 calls for deep stops and the vision does not, what i have been told is that the vision follows a profile very much like the new vr3 program the vpm deco program. so you can still use the vr3. and if you feel the need upgrade to the vpm model

[Evolve]

Originally Posted by alby scubakitmarket

sorry the incident was posted a couple of days ago when a diver had a massive hit cannot rememeber the name

Where did you see this "incident" posted?

Also without details how can you insinuate that the Vision was responsible for the apparent hit. Without facts to back up your statement, I would respectfully ask you not to post any further speculative details.

[Richie]

Originally Posted by Vision

Where did you see this "incident" posted?

Also without details how can you insinuate that the Vision was responsible for the apparent hit. Without facts to back up your statement, I would respectfully ask you not to post any further speculative details.

..just a tad protective?

Can we ask your specific interest in this thread other than the clash with your name?

[daveb0000]

Originally Posted by colinicky

the only issue i'm aware of is the time keeping on the nitrox software BUT it doesn't affect all units & with version 30 (i believe ) does not affect trimix.
or is there another issue ?
BL**DY well hope not my unit should be at my instructors NOW!

on the first dive on the unit, steve the instructor told me we would start off nice and steady and if all goes well do a long dive of about 1 hour or more so when he indicates to me that it's the end of the dive and i only had 42min's on the timer i was suprised, but even more so when he told me we had just done 1.15 mins when we got out. the second dive was the same getting around 34mins for the hour dive.

that night i down loaded the deco software that we had and it fixed the timer on the unit and its run true ever since.

[daveb0000]

[quote=Janos]Personally I wouldn't use the Vision electronics for deco but would use some other means.

Janos

hi janos

why would'nt you use the deco program on the vision ?? or am i missing something.