LinkBack URL
About LinkBacksI'll fill it off Peter's dil bottle so the He makes it float more. He'll like it if I do that.
Best Friday Thread Ever?
I'll fill it off Peter's dil bottle so the He makes it float more. He'll like it if I do that.
Mod 2.5 apparently
Will i bollocks ! i'll hide my dil and bailout now !Originally Posted by Leg Of Salmon
I'll fill it off Peter's dil bottle so the He makes it float more. He'll like it if I do that.
If you can stay calm, while all around you is chaos... then you probably haven't completely understood the seriousness of the situation.
Told you my feet were cold ...
Now that's not very nice of you is it.
Let him fill it off your O2 bottle, there a good boy
DID I TELL YOU WE WENT TO THE GALAPAGOS?
Divin' under the down.......
To avoid any transfer of water, ensure you fill the crack bottle with the base lower than the valve and the whole crack bottle lower than the donor cylinder i.e. lean the donor cylinder forwards: personally, to avoid filling too often, I would get a 3 litre and wait till my buddy is diving with 18/45.....then ask for a fill.
An interesting point ref fill and run - anyone seen one explode/come apart as it is filled?
In the land where the only thing better than ripper is bloody ripper...
Member
it needs to be filled of a full tank,or when you set it off you get a limp smb
and you know how that makes you look !!!
Still New Member
Unless you've got the 0.2l bottle which will fill the smb from a 100 bar fill. Downside is the cylinder is bulkier.
Eagle or Ferret?
....and you ought to have a gauge in the line if you try to fill it from a full 300 bar bottle.
Well, you could do it without. It would be interesting.
Nigel N
Likes to play his bongo's in the morning
never heard of one going bang, and don't forget they were frequently used when ABLJs didn't have a direct feed from the 1st stage...To avoid any transfer of water, ensure you fill the crack bottle with the base lower than the valve and the whole crack bottle lower than the donor cylinder i.e. lean the donor cylinder forwards: personally, to avoid filling too often, I would get a 3 litre and wait till my buddy is diving with 18/45.....then ask for a fill.
An interesting point ref fill and run - anyone seen one explode/come apart as it is filled?
Spike Milligan's SCUBA rules:
"If you never have a plan, nothing can ever go wrong"
It's all gone a bit "Council"
You can fill it fully twice from a 0.1L full cylinder.
Currently attired in Seaskin's finest
www.kitfondle.co.uk
Kit That Makes Brave Men Weep
www.nusac.info
A rather brilliant place to dive
"We don't need no stinkin' badges!"
Hmmm....
0.1l * 220 bar = 22 litres. What's the volume of a Buddy DSMB? I reckon about 20 litres.
Posting Permissions 
Reply With Quote
