Apeks TX 40 is it ok for nitrox?

[TDR]

As above really. Thankyou.

[Leg Of Salmon]

Yes

[thermocad]

yep... use them upto 100%

[johnbella]

Yes, however have them serviced before hand and tell them that you will be using them with nitrox. I have 40's and just had them serviced, they changed the 1st stage filter from a fabric? filter to one that can be used upto 40% nitrox.

Cheers
john

[pieater]

When you say "TX40"; do you mean just the second stage; or does your definition of a TX40 also include a first stage?

With high % O2, personally I would make sure the first stage is O2 cleaned (as it handles O2 at high pressure); for second stages I would use pretty much anything that looks as if its not ben sat in a bath of petrol for a week.

[don]

Yes, however have them serviced before hand and tell them that you will be using them with nitrox.

Apex ATx and xTx come ready for upto 40% out of the box according to my user manual.

[matt 232]

Apex ATx and xTx come ready for upto 40% out of the box according to my user manual.

used to be but according to a memo to service tech's from Apeks not anymore
but if your outside Europe out of the box up to 40%?
Same fecking reg!!!

[neilh]

used to be but according to a memo to service tech's from Apeks not anymore

They will be if they are the M26 variant.

Clearly it's the screw thread on the 1st stage that is specially cleaned