Doing it right in an inverted "stylee"

[Angus]

Originally Posted by wilbo

dude.. tis a thing of beauty..

The big red bungied wing looks pretty good too Steve and the boots are on the ball - congratulations!!

(On a more serious note though Steve, be careful being seen on these boards wearing shorts. You don't want to get the natives excited, I'm already surprised Fiona only commented on the stand and not your thighs)!!

[paramedic paul]

of the garden mate but someone's spoiled them by sticking some tanky things in the way!

P.s. you've got some cotton hanging out of your shorts!!

[Steve Summers]

Originally Posted by Angus

(On a more serious note though Steve, be careful being seen on these boards wearing shorts. You don't want to get the natives excited, I'm already surprised Fiona only commented on the stand and not your thighs)!!

No reaction at all mate obviously my thighs don't cut the mustard

Originally Posted by Paramedic Paul

P.s. you've got some cotton hanging out of your shorts!!

Don't worry a dead bird never falls out of the nest

Originally Posted by Purple Vonny

First you eat squirty cream and then you have the audacity to post photos of yourself fondling your knob(s). Good grief.

When you mentioned a while ago about you being a pain control Nurse, I assume you meant that you caused the pain

Originally Posted by Bardo

Nice optics, mate - nothing like having a bar in your own living room (or garden!), eh!

trouble is after the Guinness they're not 02 clean anymore

Originally Posted by marine boy

i was looking at making a cage for my twin 15s as the cd one i dont thinck would take the weight and this is very close to what i had drawn up.

If you haven't done it already I can send you the engineering schematics.

Safe diving,
Steve

[markosis]

Those look really nice.

I used to twinvert but the Custom divers protector stopped all that nonsense when it bent.

I'm tempted to go back to the upsidedown side!

[Buoyant Babe]

You bad evil boy...there was I about to fit the two CD slob knobs I just got off ebay (on account of my neo suit restricting shutdowns) and along you come with yet more reasons to spend money and change my set up yet again!!!!

*Thinks* I suppose if I flogged the slob knobs I'd have the money for the stands...

[Sakara Drinker]

They do look nice don't they? I was thinking about inverting mine. I see they aren't listed on the website that was posted last year. Might drop the guy an email and see if he will knock up a batch.

[Snash]

Nice garden as well Steve. Actually mean that - looks a really relaxing place.

Snash

[MartyC]

Steve,
I notice ur manifold isolator is offset, is it a problem if the valve is in the middle? does it clash with the leg of the guard?

[Steve Summers]

Originally Posted by MartyC

Steve,
I notice ur manifold isolator is offset, is it a problem if the valve is in the middle? does it clash with the leg of the guard?

Hi Marty,

I don't think it will be a problem as there would still be space to get your hand to it. At a push I can reach it with my other hand.

Safe diving,
Steve

[nigelH]

Originally Posted by MartyC

I notice ur manifold isolator is offset, is it a problem if the valve is in the middle? does it clash with the leg of the guard?

I started with my twinverts isolator pointing inward but with a wrist covered in computers, compasses and slates it proved impractical and I reset it to point outward and that worked very well. I could reach it with finger tips of either hand and turn it one handed or, if I grabbed the bullbars with the other hand and heaved the rig over, it came right into my hand and I could snap the valve shut. None of that 'shut down in X seconds' lark. Just Grab, Heave, Shut - were you counting?