Good Choice of Torch?

[Woz]

<font color='#000080'>I am a bit of a magpie when it comes to shiny things. Comes from running an engineering company and knowing exactly how much stuff costs in the real world rather than 'Planet Diveshop'.

[Woz]

<font color='#000080'>OK OK I have a problem with shiny things and can't help myself....

50W 12V nickel plated steel head running at 14.4V (more like 75W) with pulsed electronics, 4 dimming levels, auto battery protection, low battery warning, 19.2V D cell rechargeable battery pack, full ocean depth wet mateable connectors, 10mm Borosilicate toughened blast furnace torch glass.  Burn time of 60 mins at full power, 250 mins at min power. Scares the crap out of the fish and you can use it to cut steel. Makes your HID look like a pilot light.

Sorry. Got carried away.



And when you switch it on, it gently dims the bulb up to stop it blowing. Oooh- and the switch is magnetically operated so no leak paths there then.

[Woz]

<font color='#000080'>And no, I'm not going to make you one. You couldn't afford it.

[Crisspy Fiver]

Christ!!!!!!!! &nbsp;

could beat the dark side with that thing,

jamie

[dave archer]

Originally Posted by [b

Quote[/b] (Woz @ Feb. 25 2004,17:18)]And no, I'm not going to make you one. You couldn't afford it.

Ha, that's cool, I need no encouragement from you or anyone else to bankrupt myself with this daft game  

...just relieved you haven't told me you could flog me a kit to build one for less than I've just forked out for my D8    

It IS very cool though, forced to admit. Just supposing money was no object, how much are we talking here....?  

[Woz]

<font color='#000080'>Well I reckon if you paid for all the workshop time that has been put into that then you would be looking at the thick end of a grand for a one-off. Of course, workshop time is free for me and I can get all of the components trade, including the batteries (www.countybattery.co.uk), connectors (www.subconn.com) and battery housing (www.univer.co.uk- the housing is a pneumatic cylinder). The 10mm glass was, surprisingly, available from my local glass shop.

I did work it out for a production run and the minimum selling cost ended up at about 500 quid.

[dave archer]

Originally Posted by [b

Quote[/b] (Woz @ Feb. 25 2004,17:35)]....you would be looking at the thick end of a grand....

Ha, well, that'd make a nice change from looking at the thin end of a tenner &nbsp;

Now, where did I put that lottery ticket? &nbsp;

[Reeve]

<font color='#000F22'>

Originally Posted by [b

Quote[/b] (Woz @ Feb. 25 2004,17:35)]Well I reckon if you paid for all the workshop time that has been put into that then you would be looking at the thick end of a grand for a one-off. Of course, workshop time is free for me and I can get all of the components trade, including the batteries (www.countybattery.co.uk), connectors (www.subconn.com) and battery housing (www.univer.co.uk- the housing is a pneumatic cylinder). The 10mm glass was, surprisingly, available from my local glass shop.

Did /do you have a plan /schematic for those of us who have access to mech &amp; elec w/shop? Or did you devise your own ideas.

gareth  

[daveking]

<font color='#0000FF'>light cannon gets my vote too &nbsp;stunning colours underwater

woz
any chance of the plans?

[Woz]

<font color='#000080'>I'm sure I can sort something out for the drawing- I made the light head a few years ago but I'll see if I still have the drawing knocking around. &nbsp;Keep your eyes peeled and I'll post it here.