Problem with Inon UWL-100 WA Conversion Lens

[greenpants]

Originally Posted by Mike Ward

Yup, sorry for the stupid questions, but as Cussy says, not normal. Get it changed?

No No NO!

I appreciate your responses, I probably should have explained the situation better in the original post.

I think I'll give CU a call and see if they have any ideas.

thanks all
Dan

[Beeblebum]

Just a thought...

Are you using the short port or the standard port on the Ike housing? The G9needs a short port with wide angle glass, i.e. the UWL-100 M67. Also, is your UWL-100 the type 1 or type 2? I have the type 2 mounted on my Ike / G9 (and also the dome unit). HTH, Tim

[greenpants]

Originally Posted by Beeblebum

Just a thought...

Are you using the short port or the standard port on the Ike housing? The G9needs a short port with wide angle glass, i.e. the UWL-100 M67. Also, is your UWL-100 the type 1 or type 2? I have the type 2 mounted on my Ike / G9 (and also the dome unit). HTH, Tim

Short port and type 2.

thanks anyway

Dan

[John63]

Hi Dan,

I'd be interested to hear what they say; perhaps you can post here.

I have a canon with Inon 100 and get some softening at the edges - though not to the exent as in the example you posted. I think I can cure mine by zooming in a touch as I've only noticed it at full wide angle, though I haven't really played with it too much yet.

Cheers, John

[Beeblebum]

In respect of INON kit, you may not get the best advice from CU as they are not the official distributors. It may be better to contact Steve at Ocean Optics.