View Full Version : Meg O2 and Miflex

08-02-11, 02:57 AM
I've rekitted my meg with the miflex hose but Im trying to determin the fitting for the 02 thread. The link of the hose is 22 inches but does anyone know what the thread fitting is to the head of the meg?

Rob Dobson
08-02-11, 07:41 AM
From memory: QC4...

08-02-11, 08:07 AM

Thanks but can you point me to a link to a Qc4, I have no idea about the number.

Rob Dobson
08-02-11, 08:35 AM
It's a Swagelok fitting. Google Swagelok UK QC4. I don't have good access from here as I'm on my phone otherwise I'd look for you.

Alternatively ping Dennis Vassey, the ISC service guy in the UK. He should be able sort you out.

08-02-11, 10:40 AM
Its a swagelock on pre 2.7 models. The current release uses a standard reg hose. The female swagelock is replaced by a 1/4" npt male to 9/16" male. This fits into the elbow on the head - you'll need to modify or replace the delrin support to give access to the fitting. It's much neater than the swagelock and easier to replace the hose if it bursts as it is a standard hose.
Dennis is the man to speak to - he has all the parts available.

08-02-11, 11:39 PM
Everyone thanks for such quick response. Yes its a male 9/16.

I just recieved the email from Jerry:

Yes, it is the standard 9/16 UNC.


Jerry Whatley

General Manager

InnerSpace Systems Corp


[email protected]