YD Scuba Diving Forums banner

Apoc trim weight

1K views 2 replies 3 participants last post by  Brad_Horn 
#1 ·
Hi all

None of my soft or hard weights fits nicely in the trim weight pocket.

As far as I can tell the internal dimensions of the pocket when closed is approximately 100mm (w) x 90mm (l) x 60mm (h) as best as I can tell (its floppy, so its hard to measure)

Has anybody moulded a weight for this, and if so, which dimensions works for you?

rgds
monty
 
#3 ·
Monty,

I use an assortment of flat hard slotted and soft shot belt weights in the pouch if diving locally or whatever is available to scrounge on site if traveling.

If you do make a solid weight would be interested in what you come up with. If you don't fly with it have you considered removing the pouch and bolting the moulded weight direct to the unit?

Regards
Brad
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top