First Stage soda bottle Din adaptor & 3d pritable rebreather
Results 1 to 2 of 2

Thread: First Stage soda bottle Din adaptor & 3d pritable rebreather

\r\n
\r\n
\r\n
\r\n \r\n
\r\n cutncarver\r\n \r\n
\r\n cutncarver is offline\r\n\r\n \r\n
\r\n \r\n New Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
Join Date
Aug 2017
\r\n \r\n \r\n
Posts
2
\r\n \r\n
Thanks
0
\r\n \r\n
Thanked 0 Times in 0 Posts
\r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n

\r\n Cool First Stage soda bottle Din adaptor & 3d pritable rebreather\r\n

\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n Currently in the stages of modelling up a fully 3d printable rebreather (for fun not tech diving) & wondered if anyone was interested in my bail out solution. I have so far managed to pump up the 500ml bottle to 8bar but will eventually upgrade it to a 3ltr frosty jacks bottle. if anyone is interested in it they can download my first stage adaptor at https://www.thingiverse.com/thing:2460318
\n
\n
\n
\nhas anyone else printed any 3d printable parts that may save me some time in my quest for a printable SCR\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n
\r\n -' + '->\r\n
\r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
\r\n
\r\n
\r\n\r\n '; pd[2108666] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #2\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n jb2cool\r\n \r\n
    \r\n jb2cool is offline\r\n\r\n \r\n
    \r\n \r\n Sorry for being a dick\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n jb2cool\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Apr 2006
    \r\n
    Location
    Bracknell, Berkshire
    \r\n \r\n
    Posts
    1,757
    \r\n \r\n
    Thanks
    34
    \r\n \r\n
    Thanked 199 Times in 173 Posts
    \r\n \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Seems kinda pointless IMO. A bailout will need to hold way more gas than that and if you already have the first stage and regs then what you need is a bail out cylinder, not a pop bottle and an adaptor.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n '; // next/previous post info pn[2108658] = "2108666,2108666"; pn[0] = ",2108658"; pn[2108666] = "2108658,2108658"; // cached usernames pu[0] = guestphrase; pu[5336] = "jb2cool"; // -->

    Threaded View

    Previous Post Previous Post   Next Post Next Post
    1. #1
      New Member
      Join Date
      Aug 2017
      Posts
      2
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Cool First Stage soda bottle Din adaptor & 3d pritable rebreather

      Currently in the stages of modelling up a fully 3d printable rebreather (for fun not tech diving) & wondered if anyone was interested in my bail out solution. I have so far managed to pump up the 500ml bottle to 8bar but will eventually upgrade it to a 3ltr frosty jacks bottle. if anyone is interested in it they can download my first stage adaptor at https://www.thingiverse.com/thing:2460318



      has anyone else printed any 3d printable parts that may save me some time in my quest for a printable SCR

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •