YD Scuba Diving Forums banner
compressor
1-4 of 4 Results
  1. Maintenance and Servicing
    Been reading a lot about this compressor, and when I say a lot I mean not a lot. I think the damned thing is so old it might as well be classed as an antique. Anyway, recently acquired one of these that actually looks in pretty decent shape. Have torn it down and am in the process of...
  2. Maintenance and Servicing
    Hi All, I have recently bought a 4S7 powered by a Petter 6hp Diesel engine. Apart from a fuel line leak (Fuel feed hose perised and hard as nails) both compressor and engine are working fine :-) I opened the Air inlet filter housing to check the condition of the intake filter today - and found...
  3. Personal Adverts
    3.5 to 10 cfm considered (Bristol/Bauer/Coltri etc. Any help appreciated. Andy
  4. Personal Adverts
    As a club we've been looking at diving a few sites in the far NW of Scotland, and we're gradually coming to the conclusion that a compressor would make our lives much easier. I've done a fair bit of research and planning, and we think that a 3.5 cfm compressor would do nicely for the sort of...
1-4 of 4 Results
Top