YD Scuba Diving Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter #1
Hi all

None of my soft or hard weights fits nicely in the trim weight pocket.

As far as I can tell the internal dimensions of the pocket when closed is approximately 100mm (w) x 90mm (l) x 60mm (h) as best as I can tell (its floppy, so its hard to measure)

Has anybody moulded a weight for this, and if so, which dimensions works for you?

rgds
monty
 

·
Registered
Joined
·
770 Posts
Monty

I use 4 x 1kg weight belt type leads they fit but it is tight, you could mould a 4kg block to fit the space or put 4kg of shot in an old sock and push it into the space.

Ricky
 

·
Registered
Joined
·
134 Posts
Monty,

I use an assortment of flat hard slotted and soft shot belt weights in the pouch if diving locally or whatever is available to scrounge on site if traveling.

If you do make a solid weight would be interested in what you come up with. If you don't fly with it have you considered removing the pouch and bolting the moulded weight direct to the unit?

Regards
Brad
 
1 - 3 of 3 Posts
Top