YD Scuba Diving Forums banner

1 - 12 of 12 Posts

·
Rich D
Joined
·
582 Posts
Discussion Starter #1
What's the difference? And which would be best for sealing round a drysuit inflator? I'm planning on putting a 'bead' in the sealing groove, which is made of a rubbery plastic type material, don't care what colour it dries
 

·
Anglesey Charter boat Skipper
Joined
·
1,033 Posts
What's the difference? And which would be best for sealing round a drysuit inflator? I'm planning on putting a 'bead' in the sealing groove, which is made of a rubbery plastic type material, don't care what colour it dries
aquasure all the way for beding yer drysuit inflator, don't rate black witch for any neoprene repairs.
use the 2 part contact glue for sticking neoprene together.
 
  • Like
Reactions: Hellenic Diver

·
Registered
Joined
·
1,619 Posts
aquasure as long as the plastic is smooth it will peel right off and you will have a nice "gasket" and it dries clear maybe you could mix some food coloring in a get it all different colours
 

·
Dive without politics
Joined
·
2,106 Posts
  • Like
Reactions: Hellenic Diver

·
Dive without politics
Joined
·
2,106 Posts
  • Like
Reactions: Hellenic Diver

·
Trouble re-Member-ing
Joined
·
1,080 Posts
I have used a hot air paint stripper to remove old seals. Just be careful.
 
1 - 12 of 12 Posts
Top