YD Scuba Diving Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter #1
Hi

Any suggestions from divers here who have attached such already and/or intend to do so on their O2 CCR?

What seems to make most sense is to use the screws that holds the cover in place on top of the ALVBOV where the Apoc HUD would go on the iCCR.

Its just stainless self tappers ... can't be that hard to get longer ones of the same type.

rgds
monty
 

·
Duvet Diver
Joined
·
1,862 Posts
My hud is currently attached using a revo hud mount clipped round the pipe and a home made metal bracket to hold the HUD in the correct place.
HTH
Simon A
 

·
Registered
Joined
·
110 Posts
Simon,

could you take a picture plse, I am going to attach my rEvo HUD as well,
tkx in advance,

Ivan


My hud is currently attached using a revo hud mount clipped round the pipe and a home made metal bracket to hold the HUD in the correct place.
HTH
Simon A
 

·
Duvet Diver
Joined
·
1,862 Posts
Simon,

could you take a picture plse, I am going to attach my rEvo HUD as well,
tkx in advance,

Ivan
Ivan,
Sorry it took so long my wife had "misplaced" the camera.
rEvo HUD with home made brass plate


Mounted on the Apoc ALBOV


The only custom bit is the brass plate, all other parts are standard rEvo or standard Apoc.
HTH
Simon A
 

·
Registered
Joined
·
110 Posts
Hi Simon,

Thank you very much !
I am going to mount my rEvo HUD using your idea..... whenever I get my O2 unit ...

best regards,

Ivan
 
1 - 6 of 6 Posts
Top