YD Scuba Diving Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,121 Posts
Imported post

Not tried it but at a rough guess attachment would involve drilling two holes (possibly already marked by indentations) in the ABS backplate and then either punching out holds and adding eyelets (or in the case of Dommie, be an unsophisticated bastard and use a hot soldering iron) to the back of the jacket for the mounting bolts to pass through.

I'm assuming it's only got the one rear camband? If not, you could use the A.P. Valves twinning kit.

HTH
 

·
Registered
Joined
·
1,121 Posts
Imported post

True, I forgot about the way you tried to widen my holes with your small bit - last time I let you drill anything of mine....

And you gave up before the job was complete, Dales and I had to finish setting the twins up....
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top