YD Scuba Diving Forums banner
1 - 3 of 3 Posts

·
Senior Member
Joined
·
1,770 Posts
Discussion Starter · #1 ·
Imported post

<font color='#000F22'>Ok boys here's one for you.

I've got two tx50s for my twins the right post is fine with the hose routing and is no trouble.

The left post when layed down with the see-thru rubber cap on the top pointing inwards (like the right) means that the reg hose pokes up a bit and is a bit of a pain.

Now I know you can get hose adapters that will send an IP hose, or in fact a hp hose off at a right-angle to make routing easier and sub-aqua products make these adapters for both 3/8th and 7/16ths.

Problem is that a tx50 has a 1/2in main reg hose.

Options as I can see are.

Fit blanking plug to 1/2in and change hose to normal size and buy adapter or does anyone know where I can get a 1/2in right angle adapter?
 

·
Senior Member
Joined
·
1,770 Posts
Discussion Starter · #3 ·
Imported post

<font color='#000F22'>Could do but didn't wanna ... anyway those awfully fine people at subaqua products have just made some of the very monkeys I need and when they come back from the platers I'm getting one.

Woo and yay
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top