YD Scuba Diving Forums banner
1 - 9 of 9 Posts

·
Registered
Joined
·
513 Posts
Discussion Starter · #1 ·
Hi,
Just wondered if anybody has this wing etc as if so you will know what i am going on about. With the Transpac and the wing there comes some little plastic nuts with a flat screw head on them, they are to connect the transpac and wing together. Does anyone know if you can buy replacments as mine are getting passed there best.
Cheers Lee
 

·
A Moderate from 04/01/07-24/12/12
Joined
·
11,804 Posts
Hi Lee

They are called Sex bolts ..... no really ..... but in the UK they are rarer than the rare dung fly which exists solely on the poo produced by Rocking horses ..... so we are talking pretty rare I think.

I'll find a link to a site in the US alternatively try your LDS if they have an account with Sea & Sea they may be able to order you some.

HTH
Mal

EDIT Click Here and page down to item RP9502
 

·
Registered
Joined
·
513 Posts
Discussion Starter · #5 ·
I did not even notice i had done that but come to mention it i do have wind, and i will contact my local and see if they can sort me out i believe they do have an account with sea and sea.
Thanks Lee
 

·
Ginger, Irish, sometimes stroppy
Joined
·
5,997 Posts
I don't actually use mine, I think the only time the bolts have been in the water was when I lent them to Mal. I keep meaning to try them though.
 

·
Registered
Joined
·
149 Posts
Deepoutdoors SS Bladder Bolts from Dive Machine Kent. We use them on both her Transpac and on my OMS IQ harness. makes life easy as wing/harness are removed from cylinders for transporting home and then straight onto hangers for hosing down and then hung up to dry.
 

·
rEvolutionary HPDW'ing
Joined
·
1,150 Posts
They are just plasic book screws! you can get them in s/s if you want them. Like most diving bits and bobs they are cheap as chips if you buy them form someone who is not selling them for the diving purposes.

Andy
 
1 - 9 of 9 Posts
Top