YD Scuba Diving Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
454 Posts
Discussion Starter · #1 ·
morning all,

I dont suppose any of you have the rubber gripper type thingy that sits on the cam band for the buddy BC's going spare do you? I need a second one as I'm going to be running indie 12's on my Commando for a while.

Obviously I will pay the postage or make a suitable donation to the RNLI.

Thanks,

Stu
 

·
Just not enough dive time.
Joined
·
9,135 Posts
which one, the one shaped with two slots in, round ends, or the long straight bit that wraps over the sides of the cam band and grips the sides of the tank(s).

I run twinindies on my Tek and I dont use any rubber stuff on the webbing, so if I can find mine they're yours.

Matt
 

·
Registered
Joined
·
454 Posts
Discussion Starter · #3 ·
Hi Matt,

Im after the long straight bit that wraps over the sides of the cam band and grips the sides of the tank(s).

If you have a spare one that would be great.

Stu
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top